| About |
|---|
| PolyJet rubber-like materials include TangoGray™, TangoBlack™, TangoPlus™ and TangoBlackPlus™. They offer various levels of elastomer characteristics: Shore scale A hardness, elongation at break, tear resistance and tensile strength that make it suitable for non-slip or soft surfaces on consumer electronics, medical devices and automotive interiors. Ideal for: Rubber surrounds and overmolding Soft-touch coatings and nonslip surfaces Knobs, grips, pulls, handles, gaskets, seals, hoses and footwear Exhibition and communication models&& |
| Product Description | |
|---|---|
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | High elastic,Soft |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 to 1.13 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 26 to 28 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 0.800 to 1.50 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 170 to 220 | % | ASTM D412 |
| tear strength | 1.96 to 3.92 | kN/m | ASTM D624 |
| Compression deformation | 4.0 to 5.0 | % | ASTM D395 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |