THERMELT 861 Black

About
THERMELT 861 black is a pure copolymer polyamide hot melt resin, non reactive and solvent free, specially designed for Low Pressure Molding applications.THERMELT 861 is mainly used for molding of electronic/electric components, connectors and cables.

Product Description
Generic	PA Not specified
Material Status	Commercial: Active
Features	Flame Characteristics

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	~1
Water Absorption	2.8	%	ISO 62

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temperature	43	℃	ISO 306/B
Glass Transition Temperature	-30	℃	ISO 11357-2

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Glow Wire Flammability Index(GWFI)	960	℃	UL746A
Glow Wire Ignitability Temperature(GWIT)	700	℃	UL746A

MECHANICAL	Nominal value	Unit	Test method
Tensile Strength
yld	4.1	MPa	ISO 527-2
brk	4.0	MPa	ISO 527-2
Elongation at Break	310	%	ISO 527-1,2
Tensile Modulus	49	MPa	ISO 527
Shore hardness	38	Shore D	ISO 868

Process Conditions
Injection Molding	Nominal value	Unit	Test method
Melt Temperature	190-210	℃
Mold Temperature	20-60	℃
Drying Temperature	8	℃
Drying Time	70	hr
Maximum Moisture Content	<0.2	%

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.