TOTAL Polypropylene PPH 3270

About
Polypropylene 3270 utilizes proprietary process technology to provide extremely low residuals for exceptional stiffness and barrier properties. FDA: 3270 complies with applicable FDA regulations for use in food contact applications. FDA statement available upon request. Applications: 3270 is recommended in orientation processes for manufacture of packaging tapes and films that benefit from improved stiffness and barrier properties. Processing: 3270 processes on oriented film extrusion equipment with typical melt temperatures of 450°F-525°F (232°C-274°C).&&

About

Polypropylene 3270 utilizes proprietary process technology to provide extremely low residuals for exceptional stiffness and barrier properties. FDA: 3270 complies with applicable FDA regulations for use in food contact applications. FDA statement available upon request. Applications: 3270 is recommended in orientation processes for manufacture of packaging tapes and films that benefit from improved stiffness and barrier properties. Processing: 3270 processes on oriented film extrusion equipment with typical melt temperatures of 450°F-525°F (232°C-274°C).&&

Product Description
Supplier	TOTAL
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Low liquidity,Low Residuals,Food contact compliance,High crystallization,Homopolymer
Availabilitys	North America
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	2.0	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
Elastic modulus
TD，Tenterframe Oriented Film	4830	MPa	ASTM D882
MD，Tenterframe Oriented Film	2900	MPa	ASTM D882
tensile strength
TD, fracture, blow molded film	269	MPa	ASTM D882
MD, fracture, blow molded film	193	MPa	ASTM D882
Tensile strain
TD, fracture, directional membrane	60	%	ASTM D882
MD, fracture, biaxial oriented thin film	150	%	ASTM D882
Water vapor transmittance
38℃，90% RH，25 µm	3.1	g/m²/24 hr	ASTM F1249

THERMAL	Nominal value	Unit	Test method
Melting temperature	165	℃	DSC

optical performance	Nominal value	Unit	Test method
gloss
45°，Tenter-frame Oriented Film	85		ASTM D2457
Haze
Tenter-frame Oriented Film	1.0	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	232 to 274	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.