| About |
|---|
| “WANKAI” Brand “WK811” PET resin bottle grade is TPA-based polyethylene terephthalic homopolymer. It is characterized by its property of thermal resistance, and is designed specially for hot-filling bottles like tea, fruit-juice and other drinks required to be hot filled for sterilization.&& |
| Product Description | |
|---|---|
| Supplier | Wankai |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Homopolymer |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Acetaldehyde | < 1.0 | ppm | |
| Color b | < 1.00 | ||
| Color L | < 83.0 | ||
| Particle Mass | 1.45 to 1.65 | g/100 pcs | |
| Intrinsic viscosity | 0.76 to 0.80 | dl/g | |
| water content | < 0.40 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 248 to 252 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 160 to 175 | °C | |
| Drying time | 4.0 to 6.0 | hr | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |